Industry News

Home / News / Industry News / Solutions to common problems of shredders (1)

Solutions to common problems of shredders (1)

1. The shredder does not feed paper
First, we check whether the shredder has electricity, press the switch again, and see if the machine motor will rotate. If it rotates, it means that there may be a problem with the sensor head, which has to be repaired by the manufacturer. If it doesn't turn, check if it is jammed. If it is jammed, clean it up and it will be OK. There is another situation, that is, the overheating protection of the shredder. Due to the long-term use of the machine, the machine automatically enters the protection state, and the shredder will stop working and will not feed paper. At this time, we only need to let the machine rest for more than 30 minutes, and it can be solved.
2. What should I do if the shredder jams?
Now shredding paper manufacturers basically have paper feed and paper return function keys. You can try the paper feed and paper return keys to see if they can exit by themselves. If not, turn off the power, and then turn the machine head upside down for a few times. down, use it to shake, and see if it can be poured out. Remember to power off the operation! If it still doesn't work, you'll have to do it yourself, find a thin metal or screwdriver, and slowly remove the stuck pieces of paper.
3. The paper cannot be shredded, but the sound of the motor running is abnormal when the switch is turned on?
This is a problem with the drive system of the shredder, and it should be sent to the designated manufacturer for repair during the warranty period.