Cutting edge angle
The choice of the cutting blade angle is a very important part of the cutting work. In other words, a good paper cutter must be equipped with a good paper cutter blade and sharpening process. However, we found in the after-sales service of the paper cutter that many paper cutter users often ignore this point. As a result, the cutting blade is often sharpened because of the wrong way, method, and angle, which increases the impact of cutting. , Causing the safety screw to loosen, or even break, and eventually cause mechanical damage.
The range of materials that need to be cut by paper cutters is becoming wider and wider, such as beer aluminum foil cap labels, carbonless copy paper, honeycomb cardboard, magnetic cards, photosensitive films, etc., these materials will encounter different practical problems in the cutting process. For example, carbonless copy paper is prone to indentation during cutting, while magnetic cards and photosensitive films may not be able to fix the paper press during cutting, resulting in waste products. These problems can be solved smoothly by adjusting the pressure of the paper press, improving the blade and cutting transmission system. However, as far as the author knows, only some paper cutter manufacturers in China can solve all of these technologies.