Troubles

Possible Causes

Solutions

  1.Is the power plug safely and securely inserted into the socket ?

  2.The motor is overheated, so the protective device is activated.

3.Is there a paper jam?

  1.Reinsert the power plug into the socket.

  2.After about 50 minutes, switch on the shredder again to shred paper.

  3.Adjust the switch to reverse key position to take out the jammed paper.

  No shredding operate.

  1.Is too much paper fed in ?

  2.The paper bin doesn't push into the reserved location .

  1.Please confirm if the amount of paper fed in exceeds the permissible amount for one operation.

  2.Please close down the machine.

  Loud noise

  Is the surface where the shredder is placed on steady and flat?

  Move the scrapper to a steady and flat surface.

Troubles

Possible Causes

Solutions

  After paper is inserted, the shredder does not operate.

  1.Is the power plug safely and securely inserted into the socket ?

  2.The motor is overheated, so the protective device is activated.

  3.Is there a paper jam?

  1.Reinsert the power plug into the socket.

  2.After about 50 minutes, switch on the shredder again to shred paper.

  3.Adjust the switch to reverse key position to take out the jammed paper.

  No shredding operate.

  1.Is too much paper fed in ?

  2.The paper bin doesn't push into the reserved location .

  1.Please confirm if the amount of paper fed in exceeds the permissible amount for one operation.

  2.Please close down the machine.

  Loud noise

  Is the surface where the shredder is placed on steady and flat?

  Move the scrapper to a steady and flat surface.